Li2B4O7坩埚内预氧化熔融铸片XRF法测定含还原物耐火材料中主量和次量组分

在四硼酸锂坩埚中,以碳酸锂和硝酸铵为氧化剂,在铂金坩埚外对含还原物耐火材料进行预氧化和烧结。在高温氧化过程中,由于样品表面包裹有含氧化剂为主的烧结物,在继续熔融氧化产生的气体浮力作用下,样品在未被氧化前,不与铂金坩埚接触。因此,避免了熔融过程中铂金坩埚腐蚀问题。实验结果表明,氧化温度控制在730℃以下,时间15min内,含还原物耐火材料样品与氧化剂发生氧化烧结反应,四硼酸锂坩埚不会熔穿。确定的预氧化温度为720℃,时间为5~15min。结合现有的报道,确定了熔融铸片所需氧化剂和脱模剂的用量、熔融温度和时间。按拟定的方法,用国家和行业标准样品绘制工作曲线,对含还原物耐火材料样品进行了测定。与湿法分析结果进行比较表明,准确度与湿法分析相当。     

Driving the photoluminescent and structural properties of X2-Y2SiO5 by varying the dopant Dy3+ concentration towards cool WLED applications

Dy³⁺ doped Y₂SiO₅ nanophosphors were synthesized by solution combustion technique using Calotropis gigantean milk latex and NaCl as fuel and flux respectively. Powder X-ray diffraction (PXRD) confirmed the formation of monoclinic X₂-phase Y₂SiO₅ belonging to the phase group C₂/c. Fourier transform infrared spectroscopy (FTIR) shows characteristic metal–oxygen (Y–O) vibration band at 721 cm⁻¹. Transmission electron microscopic (TEM) and Scanning electron microscopic (SEM) morphological feature exhibits non-uniform almost spherical shaped nanosized particles. The photoluminescence (PL) emission peaks, recorded at 388 nm, showed radiative emissions at 483, 575 and 636 nm respectively. Judd–Ofelt (JO) analysis was carried out to estimate the radiative (A_R) properties, radiative life time (τ_R), branching ratio (β_R) and stimulated emission crossection (σλ_p). The CIE and CCT was estimated using McCamy empirical formula. In the beginning, the CIE co-ordinate values were lying in the light blue region. However, with increase in Dy³⁺ concentration the values shifted towards white region. CCT value was found to be ∼6984 K. Therefore, Y₂SiO₅:Dy³⁺ (9 mol%) can be used for cool day light and WLED applications.     

Analysis of an elasto-piezoelectric system of hemivariational inequalities with thermal effects

In this paper we prove the existence and uniqueness of a weak solution for a dynamic electo-viscoelastic problem that describes a contact between a body and a foundation. We assume the body is made from thermoviscoelastic material and consider nonmonotone boundary conditions for the contact. We use recent results from the theory of hemivariational inequalities and the fixed point theory.     

发光颜色可调的白磷钙矿结构Ca8MgBi(PO4)7∶Ce3+，Tb3+荧光粉的制备、发光性能及能量传递

采用具有白磷钙矿结构的磷酸盐作为目标产物,通过高温固相法制备了发光颜色可调的Ca₈MgBi(PO₄)₇∶Ce³⁺,Tb³⁺荧光粉。利用X射线粉末衍射(XRD)、扫描电子显微镜(SEM)和荧光光谱等表征手段对其物相组成、微观形貌及发光性能进行了详细研究。结果表明：掺杂少量的Ce³⁺、Tb³⁺并没有改变Ca₈MgBi(PO₄)₇基质的晶体结构。荧光光谱和荧光寿命曲线确定了Ce³⁺-Tb³⁺之间存在能量传递,其能量传递机制为四极-四极相互作用,能量传递效率可达81%。固定Ce³⁺浓度而逐渐增加Tb³⁺的掺杂量时,系列Ca₈MgBi(PO₄)₇∶0.08Ce³⁺,yTb³⁺荧光粉的发...     

锰离子氧化沉淀法实现锂离子电池LiNi0.8Co0.05Mn0.15O2材料的回收和利用

以浓盐酸为浸出剂,以NaOH和NH₄HCO₃为沉淀剂,利用Mn²⁺在碱性条件下的氧化反应改变离子的沉淀次序进而分步回收的方案,探究了浓盐酸酸浸处理三元正极材料LiNi_0.8Co_0.05Mn_0.15O₂的最佳条件。在分步沉淀过程中,Mn²⁺被氧化为不溶于非还原性酸的MnO （OH）₂,并在酸性条件下回收。Ni、Co则在碱性条件下利用NaOH回收,而Li则利用NH₄HCO₃回收。该方法中Mn的回收率达到85.1%,产品纯度达到98.6%; Li的回收率达到95.0%,产品纯度达到99.3%。由回收材料重新合成的三元正极组装的软包电池的首圈放电比容量达到了175 mAh·g^-1,可以以超过99.5%的库仑效率稳定循环50圈。     

Functional Dithienopyrazines: Structure-Property Relationships**

Dithienopyrazines are only scarcely used as building blocks in organic electronic materials. Here, we report efficient preparation and investigation of syn- and anti-dithienopyrazines, which were functionalized with triaraylamine units to provide different series of donor-acceptor-donor-type materials. The characterization of the optoelectronic properties resulted in valuable structure-property relationships and allowed for the elucidation of the influence of structural effects such as core structure (syn vs anti), type of substituents (directly arylated vs ethynylated aryl), and substitution pattern (α,α’- vs β,β’- vs fourfold substitution). Finally, first application of a dithienopyrazine derivative as model for hole-transport materials tailored for organic electronic devices has been realized.     

Simple high-performance liquid chromatography-ultraviolet method for simultaneous separation and detection of 14 bisphenol pollutants in building materials

A high-performance liquid chromatography-ultraviolet method was developed for rapidly and simultaneously analyzing novel and typical bisphenols in building materials, including bisphenol S, diphenolic acid, bisphenol F, bisphenol E, bisphenol A, bisphenol B, bisphenol AF, bisphenol AP, bisphenol C, bisphenol FL, bisphenol Z, bisphenol BP, bisphenol M, and bisphenol P. By using a Kromasil 100–5 C18 column, these bisphenols were completely separated in 40 min via gradually increasing the concentration of methanol in the mobile phase from 45 to 80% during the elution process. In particular, this method achieved the synchronous analysis of bisphenol S, diphenolic acid, bisphenol FL, bisphenol BP, and bisphenol M through HPLC, which were difficult to separate and had to be identified and detected through mass spectrometry. The limits of detection of the method ranged from 0.002 to 0.040 mg/L for these 14 bisphenols, with a precision of less than 4.9% (n = 7, c = 0.05 mg/L). The analytical results for five types of building materials (phenolic, epoxy, polycarbonate, polyester, and polysulfone resins) indicated that the proposed method is appropriated for the rapid measurement of bisphenols in real samples.     

Surface modification of date palm activated carbonaceous materials for heavy metal removal and CO2 adsorption

In this study, high surface area activated carbon (AC) was prepared from a local palm tree (Phoenix Dactylifera) using a variety of metal carbonates activators and finally achieved an excellent S_BET of 2700 m²/g when Cs₂CO₃ was used as an activating agent at a temperature of 600 °C. Surface modification of AC was carried out using various nitrogen transporting agents, resulting in N-doped ACs with nitrogen content varying from 4.0 to 11.4 %, depending on the functionalizing agents and activators used. The bimodal (presence of micro- as well as meso-porosity) ACs with such excellent surface properties were studied for their CO₂ uptake capacity at two different temperatures (0 and 25 °C) by isotherms recorded at pressure 1 bar and showed a remarkable uptake ability of 3.52 mmol/g (at 25 °C) and 5.6 mmol/g (at 0 °C), respectively. Also, batch experiments with variable pH, contact time, adsorbate concentrations, adsorbent dose, and temperatures were evaluated to understand the mechanism of sorption phenomena of Cr(VI) and Pb(II) achieving > 99.9 % removal capacity by the prepared ACs. Depending on the heavy metal ions being investigated, it was revealed that the pH of the solution and the amount of adsorbent had a direct impact on the total adsorption ability. Nitrogen atoms doped into the carbon frameworks were found to enhance the adsorption in the case of Pb(II) while the removal of Cr(VI) appeared to be unaffected. Maximum adsorption for Cr(VI) was observed at pH 2 and was determined to follow Freundlich isotherm while that of Pb(II) was observed at pH 7 and follows Langmuir isotherm. Best adsorption was found at an adsorbate concentration of 10 ppm and an adsorbent dose of 10 g/L. Kinetic modeling parameters showed the applicability of pseudo-second-order model perfectly.     

The role of Carica papaya latex bio-catalyst and thermal shock in water on synthesizing rice husk

A bio-catalyst made of natural resources, such as Carica papaya latex, is very challenging for nanoparticle separation. In addition, differences in thermal conditions between nanoparticles affect the movement of substances in the separation process. The study experimentally investigated the role of Carica papaya latex bio-catalyst and thermal shock in water on synthesizing rice husk (RH). The synthesis retained the Mg and C elements attached to SiO₂, which were generally neglected during the process. The study's objective was to evaluate the effectiveness of biocatalysts and thermal effects on the separation of Mg-SiO₂-C from rice husk carbon nanoparticles (CNPs-RH). The research involved various treatment processes, such as RH pyrolysis in obtaining charcoal, High energy milling (HEM) to have carbon particles, and washing to get nano-sized carbon particles. The bonding of elemental compounds to rice husk carbon particles (CPs-RH) was released using NaOH and coagulation using a bio-catalyst. Coagulated CPs-RH was injected into water at a temperature of 60–70 °C to have a thermal shock effect for H₂O clusters in Na⁺ and Mg²⁺ ions attached to the surface of the nanoparticles. Several tests were carried out, such as the SEM-EDX, TEM, XRD, and FTIR tests, to investigate the two nanoparticle clusters formed up to the nanometer scale. The results indicated that CNPs-RH nanoparticles consist of spherical particles with a diameter of 1.2 nm, while Mg-SiO₂-C nanoparticles have a diameter of 0.6 nm. Both are classified as amorphous. Based on the FTIR test, CNPs-RH is hydrophilic, while Mg-SiO₂-C is hydrophobic. Thermal shock in water strengthens the ion's mobility, increasing the interfacial dipole forces between nanoparticles and accelerating the separation process.     

CoO纳米颗粒/石墨烯纳米纤维复合材料的制备及电化学性能

用石墨烯和Co(CH₃COO)₂·4H₂O作为原料,利用超声辅助法合成了锂离子电池的负极材料CoO纳米颗粒/中空石墨烯纳米纤维复合物.采用X射线衍射(XRD)确定材料的物相组成,采用扫描电子显微镜(SEM)和透射电子显微镜(TEM)观察材料的表面形貌和微观结构,采用X射线光电子能谱(XPS)确定材料的价态结构.采用循环伏安、恒电流充放电和交流阻抗谱表征材料的电化学性能.结果显示,在100 mA/g的电流密度下,循环了160次后,可逆容量仍超过800 mA/g,库仑效率保持在99%以上.该材料优异的电化学性能主要归因于石墨烯的中空纤维结构,中空内部可以容纳电解液,能直接将离子输送到颗粒表面,实现了离子的快速传输;二维中空纤维搭建成三维网络结构,实现了三维电子传导网络.